|
|
|
Precision Rifles, Our rifles are built using benchrest quality, stainless steel and chrome moly actions which provide both the consistency and high standard of craftsmanship which Precision Rifle Services require. Designed
and manufactured by Jim Borden, the actions are round bodied with spiral fluted bolts and can be
supplied in either Hunter or Standard styles. The minimum tolerance bolt to
action fit uses the patented Borden bolt design which adds greatly to the
accuracy potential of these actions. The bolts are made in one piece thus
limiting the problems of handles breaking off.
The
extractor claws are similar to that of Left
Hand Actions and opposite port configurations are available at no extra cost.
This
range of actions is recommended for hunting rifles up to 9lbs as they are
lightweight with a large loading port. All Hunter actions are available in 15-5
Stainless Steel and both the HM & HL can be supplied in 4340 Chrome Moly
with a black finish. The
sides are faceted and the tang is shallow allowing a wider choice of stock style
including any of the Remington styles. McMillan stock catalogues available on
request. This
series is 1.35” in diameter and is available in three different lengths.
STANDARD RANGE
This
series of 15-5 stainless actions is recommended for heavier hunting rifles and
target rifles and will accept our whole range of centre-fire cartridges
including Lazzeroni Magnums. The
loading port is small for maximum rigidity and the heavier tang suits the
McClassic, Tactical and Competition styles of stocks. There
is a choice of either 1.35” of 1.47” action diameter and as with the Hunter
series three different lengths are available.
We
only use Stainless Select Match and Chrome-Moly Match Grade Barrels from
manufacturers who guarantee their product. Parallel rifled blanks are purchased
and all additional machining work, except fluting, is completed in house. Barrel
profiles can be supplied in various standard and custom shapes to optimise
weight, balance and accuracy.
Chambering
is completed using high quality reamers with interchangeable 0.0001"
increment pilots. Our reamers are ground by manufacturers in the
Barrel
finishes are offered in polished and bead blasted (matte) for stainless steel
and machine polished, hand polished or matte black for chrome molybdenum steel.
Advice
can be given on every aspect of choosing a barrel from which cartridge would
suit your needs to which twist rate and chamber dimensions will optimise the
bullet style & weight that will most commonly be fired through the rifle. We
are pleased to help with alternative chambers and wildcat work although a
tooling surcharge will be applied to the overall cost of the rifle.
Further
details of profiles, weights & chambers can be found in our
Re-barrelling
Section.
|
|
|